Cylinder Bank 1 (Right) Camshaft Housing, Removing And Installing: Notes

Special tools and workshop equipment required 

• Impact Puller : T10133/3  from Injector/Combustion Chamber Seal Tool Set: T10133C 
  Fig 1: Identifying Injector/Combustion Chamber Seal Tool Set

  Courtesy of AUDI OF AMERICA, LLC
• Camshaft Adjustment Pins: T40060  (with the engine installed)
  Fig 2: Camshaft Adjustment Pins T40060

  Courtesy of AUDI OF AMERICA, LLC
• Locating Pins: T40116 
  Fig 3: Identifying Locating Pins T40116

  Courtesy of AUDI OF AMERICA, LLC
• Hand drill with plastic brush insert
• Protective Eyewear
• Sealant. Refer to the Electronic Parts Information (ETKA).