Camshaft Timing Chain, Removing From Camshafts, Cylinder Bank 2 (Left): Removing

-- Remove the left lower air duct pipe on the turbocharger. Refer to LOWER AIR DUCT PIPES ON TURBOCHARGER, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- to do so slightly lift the noise insulation on the camshaft bearing cap.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the oil dipstick tube -2-.

-- Seal the opening with thoroughly clean plus from the Engine Bung Set: VAS6122  .

-- Free up the bracket -4-.

-- Disconnect the connectors.

1 -

For the Engine Temperature Sensor -G407-

4 -

For the Camshaft Position Sensor 4 -G301-

All additional procedures are described. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .