Overview - Heat Shields
- Heat Shield
- For left and right front longitudinal member
- Removing and Installing. Refer to FRONT LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING .
- Tightening Specifications:
- Spring nuts: 2 Nm
- Nuts: 4.5 Nm
- Heat Shield
- For the plenum chamber bulkhead
- Removing and Installing. Refer to PLENUM CHAMBER BULKHEAD HEAT SHIELD, REMOVING AND INSTALLING .
- Tightening Specifications:
- Spring nuts: 2 Nm
- Heat Shield
- For the lower plenum chamber bulkhead
- Removing and Installing. Refer to LOWER PLENUM CHAMBER BULKHEAD HEAT SHIELD, REMOVING AND INSTALLING .
- Tightening Specifications:
- Spring nuts: 2 Nm
- Heat Shield
- For left front tunnel
- Removing and Installing. Refer to HEAT SHIELD FOR FRONT TUNNEL, REMOVING AND INSTALLING .
- Tightening Specifications:
- Spring nuts: 2 Nm
- Nuts: 4.5 Nm
- Heat Shield
- For right front tunnel
- Removing and Installing. Refer to HEAT SHIELD FOR FRONT TUNNEL, REMOVING AND INSTALLING .
- Tightening Specifications:
- Spring nuts: 2 Nm
- Nuts: 4.5 Nm
- Insulation
- For the front of the tunnel
- Heat Shield
- For the tunnel center
- Removing and Installing. Refer to CENTER TUNNEL HEAT SHIELD, REMOVING AND INSTALLING .
- Tightening Specifications:
- Nuts: 2 Nm
- Heat Shield
- For the tunnel rear
- Removing and Installing. Refer to HEAT SHIELD FOR REAR TUNNEL, REMOVING AND INSTALLING .
- Heat Shield
- For the center muffler
- Removing and Installing. Refer to CENTER MUFFLER HEAT SHIELD, REMOVING AND INSTALLING .
- Tightening Specifications:
- Spring nuts: 2 Nm
- Heat Shield
- For rear floor
- Removing and Installing. Refer to HEAT SHIELD FOR REAR FLOOR, REMOVING AND INSTALLING .
- Tightening Specifications:
- Spring nuts: 2 Nm
- Screw: 2 Nm
- Heat Shield
- For left rear muffler
- Removing and Installing. Refer to REAR MUFFLER HEAT SHIELD, REMOVING AND INSTALLING .
- Tightening Specifications:
- Spring nuts: 2 Nm
- Heat Shield
- For right rear muffler
- Removing and Installing. Refer to REAR MUFFLER HEAT SHIELD, REMOVING AND INSTALLING .
- Tightening Specifications:
- Spring nuts: 2 Nm