Overview - Rear Center Armrest
- Lower Cover
- For rear center armrest
- Removing and Installing. Refer to REAR CENTER ARMREST COVER, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Center Armrest Decorative Trim
- Equipped on some models
- Allocation. Refer to the Electronic Parts Information (ETKA).
- Quantity: 2
- Removing and Installing. Refer to REAR CENTER ARMREST DECORATIVE TRIM, REMOVING AND INSTALLING .
- Replace damaged or deformed clips
- Press on until it engages audibly
- Front Cover
- For rear center armrest
- Removing and Installing. Refer to REAR CENTER ARMREST COVER, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Insert Trim
- For rear center armrest
- Removing and Installing. Refer to REAR CENTER ARMREST INSERT TRIM, REMOVING AND INSTALLING .
- Replace damaged or deformed clips
- Press on until it engages audibly
- Bolt
- Quantity: 2
- 2 Nm
- Spacer Wedge
- Removing and Installing. Refer to REAR CENTER ARMREST STORAGE COMPARTMENT, REMOVING AND INSTALLING .
- Storage Compartment Trim
- For rear center armrest
- Removing and Installing. Refer to REAR CENTER ARMREST STORAGE COMPARTMENT, REMOVING AND INSTALLING .
- Replace damaged or deformed clips
- Press on until it engages audibly
- Bolt
- Quantity: 4
- 1.5 Nm
- Center Armrest Storage Compartment
- Equipped on some models
- Allocation. Refer to the Electronic Parts Information (ETKA).
- Removing and Installing. Refer to REAR CENTER ARMREST STORAGE COMPARTMENT, REMOVING AND INSTALLING .
- Rear Center Armrest
- Equipped on some models
- Allocation. Refer to the Electronic Parts Information (ETKA).
- Removing and Installing. Refer to REAR CENTER ARMREST, REMOVING AND INSTALLING .
- Bolt
- Quantity: 3
- 3 Nm
Tightening Specification - Control Head for Rear Seats
-- Tighten the bolts -1- to 2 Nm.