Ribbed Belt For Sub-Assembly, Belt TENSIONER, Idler Pulleys And Belt Pulley Water Pump, Replacing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Procedure:
-- Replace the sub-assembly ribbed belt according to the repair information specifications. Refer to RIBBED BELT, REMOVING AND INSTALLING (2.0L) , RIBBED BELT, REMOVING AND INSTALLING (3.0L) or RIBBED BELT, REMOVING AND INSTALLING (4.0L) .
-- Replace the belt tensioner, idler pulleys and belt pulley according to the repair information specifications. Refer to OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE (2.0L) , OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE (3.0L) or OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE (4.0L) .
NOTE:
Only applies to Q7 e-tron.