Windshield Defogger Control Module -J505-, REMOVING AND INSTALLING, FROM JANUARY 2017: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Vehicles with high-voltage system: switch off the function "parking heater" (deactivate). Refer to Owner's Manual.
-- Switch off the ignition.
-- Remove the right front seat. Refer to Front Seat, Removing and Installing .
-- Remove the front right sill panel. Refer to VEHICLE INTERIOR TRIM PANELS .
-- Loosen the right front carpet and lift until the Windshield Defogger Control Module -J505- -A- is accessible. Refer to VEHICLE INTERIOR TRIM PANELS .
-- Release the locking tabs on the bracket -C- and pivot the Windshield Defogger Control Module -J505- -A- upward.
-- Release the connector -B- and remove it from the Windshield Defogger Control Module -J505- -A-.