Overview - Rear Side Window

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

The following dimensions represent the distances at the marked points. This must also be oriented to the layout of the original adhesive bead on the removed component.

Courtesy of AUDI OF AMERICA, LLC

Rear Side Window
- Removing and Installing. Refer to REAR SIDE WINDOW, REMOVING AND INSTALLING .
- After installing push in first with the retainers -item 8-
Adhesive Bead
- Observe the minimum curing time. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
- Note the different distances to the window edge
  - Dimension -a- = 13 mm.
  - Dimension -b- = 8 mm
  - Dimension -c- = 13 mm
- Adhesive bead thickness. Refer to Adhesive application: .
Side Panel Window Opening
Molding
- Must not be damaged in the visible area
Trim Molding
Lower Trim Molding
Securing Hole
Retainer
- No replacement part
- Is cut through when removing the window.