Overview - Rear Window
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
The following dimensions represent the distances at the marked points. This must also be oriented to the layout of the original adhesive bead on the removed component.
- Rear Window
- Before removing, disconnect all the connectors and secure the contacts toward the inside to the middle of the window glass using adhesive tape.
- Removing and Installing. Refer to REAR WINDOW, REMOVING AND INSTALLING .
- Adhesive Bead
- Observe the minimum curing time. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
- Note the different distances to the window edge
- Dimension -a- = 8 mm.
- Dimension -b- = 5 mm
- Dimension -c- = 10 mm
- Adhesive bead thickness. Refer to Adhesive application: .
- Rear Lid Window Opening
- Spacer
- Trim