Garage Door Opener Control Head -E284-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front interior lamp/reading lamp. Refer to FRONT INTERIOR LAMP/READING LAMP, REMOVING AND INSTALLING .
-- Remove the Anti-Theft Alarm System Sensor -G578-, if equipped. Refer to Anti-Theft Alarm System Sensor -G578-, REMOVING AND INSTALLING .
-- Carefully push the catches to the side in direction of -arrows-.
-- Remove the control head -2- from the front interior lamp/reading lamp -1-.