LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> S7 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Windshield Wiper System >> Wiper Blade, Removing And Installing >> Wiper Blade, Removing And Installing, Windshield Wipers With Integrated Washer Nozzles >> Installing

Wiper Blade, Removing And Installing, Windshield Wipers With Integrated Washer Nozzles: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Guide the wiper blade -2- parallel into the windshield wiper arm -1- in direction of -arrow-. Make sure that the wiper blade is slid into the windshield wiper arm until the clip audibly engages.

GWWA92-10451Courtesy of AUDI OF AMERICA, LLC

-- To leave the "service position", either press the windshield wiper switch or drive faster than 6 km/h (3.7 mph).