Windshield Wiper, Bringing Into Service Position
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
- If the windshield wiper motor is to be run during the procedure, the front lid must be completely closed, otherwise the power supply to the wiper motor will be interrupted.
-- Make sure the wiper blades are not frozen if there is a risk for frost.
-- Switch the ignition on.
-- Activate the windshield wiper "on" menu item using the multimedia system control head. Refer to the Owner's Manual.
- The windshield wipers run in the "service position".
-- Switch the ignition off.
CAUTION:
Risk of damaging the front lid by moving the windshield wipers back to the basic setting.
- Never maneuver a vehicle with the windshield wiper arms folded up.
TIP:
At a speed of 6 km/h (3.7 mph) or when operating the windshield wiper switch, move the windshield wipers back into the home position.