Windshield Wiper Motor -V-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the windshield wiper arms. Refer to WINDSHIELD WIPER ARMS, REMOVING AND INSTALLING .

-- Remove the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .

Courtesy of AUDI OF AMERICA, LLC

-- Remove the expanding rivet -1-.

-- Pivot the filler neck -2- upward but do not remove the washer fluid reservoir and the body opening -3-.

-- Remove the bolts -1, 3 and 5-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the windshield wiper frame -2- with the linkage and remove the windshield wiper motor from the plenum chamber.

-- Disconnect the connector -4-.