Windshield Wiper Arms, Removing And Installing, From Product Improvement: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

-- Pry the caps -arrows- off of the windshield wiper arms -1- with a screwdriver.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -2-.

-- Position the hook -2- on the windshield wiper arm -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Position the Puller - Windshield Wiper: T40394 on the opposite side of the windshield wiper arm and latch the pivoting hook -3-.

-- Push the locking ring -4- downward in direction of -arrow-.

-- Turn the bolt -5- clockwise until the windshield wiper arm is removed from the windshield wiper axle.

-- Remove the windshield wiper arms.