Overview - Windshield Wiper System, From Product Improvement
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
- Driver Side Wiper Blade
- There are different lengths. Refer to the Parts Information.
- Replacing. Refer to WIPER BLADE, REMOVING AND INSTALLING .
- Replacing. Refer to WIPER BLADE, REMOVING AND INSTALLING, WINDSHIELD WIPERS WITH INTEGRATED WASHER NOZZLES .
- Driver Side Windshield Wiper Arm
- There are different lengths and versions. Refer to the Parts Information.
- Removing and Installing. Refer to WINDSHIELD WIPER ARMS, REMOVING AND INSTALLING, FROM PRODUCT IMPROVEMENT .
- Adjusting. Refer to WINDSHIELD WIPER ARMS, ADJUSTING .
- Windshield Wiper Arm Cover
- Windshield wipers with integrated washer nozzles only
- Cap
- Nut
- 32 Nm
- Bolt
- Tightening specification and sequence. Refer to Fig 2.
- Windshield Wiper Motor -V-
- With the Wiper Motor Control Module -J400-
- Removing and Installing. Refer to Windshield Wiper Motor -V-, REMOVING AND INSTALLING .
- Nut
- 32 Nm
- Cap
- Windshield Wiper Arm Cover
- Windshield wipers with integrated washer nozzles only
- Front Passenger Side Wiper Blade
- There are different lengths. Refer to the Parts Information.
- Replacing. Refer to WIPER BLADE, REMOVING AND INSTALLING .
- Replacing. Refer to WIPER BLADE, REMOVING AND INSTALLING, WINDSHIELD WIPERS WITH INTEGRATED WASHER NOZZLES .
- Front Passenger Side Windshield Wiper Arm
- There are different lengths and versions. Refer to the Parts Information.
- Removing and Installing. Refer to WINDSHIELD WIPER ARMS, REMOVING AND INSTALLING, FROM PRODUCT IMPROVEMENT .
- Adjusting. Refer to WINDSHIELD WIPER ARMS, ADJUSTING .
Windshield Wiper Motor - Tightening Specification and Sequence
-- Tighten the bolts in the steps in the sequence shown:
| Step | Bolts | Tightening Specification |
|---|---|---|
| 1. | -1 to 3- | Install all the way by hand |
| 2. | -1 to 3- | 8 Nm |