Windshield Washer Fluid Level Sensor, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the washer fluid reservoir until the windshield washer fluid level sensor is accessible. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .
-- Place a drip tray under the washer fluid reservoir.
-- Disconnect the connector -1-.
-- Remove the Windshield Washer Fluid Level Sensor -G33- -2- from the washer fluid reservoir.