Washer Fluid Reservoir Filler Neck, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Slide the grommet -1- all the way onto the filler tube for the filler neck -3-.
- The tab -2- must fit into the opening -arrow- on the filler tube.
-- Insert the filler neck into the washer fluid reservoir.
-- Pay attention that the gasket is not crushed when sliding it in the washer fluid reservoir.