Washer Nozzle For Laser Distance Regulation Control Module, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .
-- Remove the upper air guide. Refer to the appropriate Cooling System Information .
-- Release the clamp on the washer fluid hose connecting piece -1-.
-- Remove the washer fluid hose from the washer nozzle -2-.
-- Remove the washer nozzle -2- on the cap -3- all the way forward from the radiator grille and hold it in this position.
-- Push the retaining tabs on the cap -3- apart in direction of -A arrows-.
-- Remove the cap -3- from the washer nozzle -2- in direction of -arrow B-
-- Remove the bolts -2-.
-- Remove the washer nozzle -1- forward in direction of -arrow-.