Overview - Windshield Projection (Head-Up Display), Before Product Improvement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Windshield Projection (Head-Up Display), Before Product Improvement

Courtesy of AUDI OF AMERICA, LLC

Instrument Panel Crossmember
Nut
- 8 Nm
- Quantity: 3
Exterior Bracket
- For windshield projection control module
- Removing and Installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING, BEFORE PRODUCT IMPROVEMENT .
Bolt
- Tightening sequence. Refer to Fig 2.
- Quantity: 2
Instrument Panel
Upper Cover
- Removing and Installing. Refer to OVERVIEW - INSTRUMENT PANEL
Windshield Projection Head Up Display Control Module -J898-
- Removing and Installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING .
- Calibrating. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, CALIBRATING .
Bolt
- Tightening sequence. Refer to Fig 2.
Bolt
- Tightening sequence. Refer to Fig 2.
- Quantity: 2
Interior Bracket
- For windshield projection control module
- Removing and Installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING, BEFORE PRODUCT IMPROVEMENT .
Nut
- 8 Nm
- Quantity: 3

Windshield Projection Head Up Display Control Module - Tightening Specification and Sequence

Fig 2: Windshield Projection Head Up Display Control Module - Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in the sequence shown.

Bolts	Tightening Specification
-1-	5.5 Nm
-2 and 3-	4 Nm