ABS Control Module -J104- / ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING: Notes
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, 2021 Audi S7, and 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
- Torque Wrench 1331 5-50Nm: VAG1331A
- Brake Pedal Actuator: VAG1869/2 .
- Bleeder bottle from the Brake Charger/Bleeder Unit: VAS5234
- Engine Bung Set: VAS6122
- Safety Gloves
- If the ABS Control Module -J104- is faulty, it can be replaced separately.
- If the ABS Hydraulic Unit -N55- is faulty, it must be replaced together with the ABS Control Module -J104-.