Turbocharger, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Loosen the screw-type clamp -1- and remove the boot -2-.
-- Disconnect the crankcase ventilation hose -arrows- by pressing the release buttons on both sides.
-- Remove the bolts -1- and the connections -2- with the crankcase ventilation hoses.
-- Remove the lower air duct pipe. Refer to LOWER AIR DUCT PIPE, REMOVING AND INSTALLING .
All additional procedures are described. Refer to TURBOCHARGER, REMOVING AND INSTALLING .