Coolant Recirculation Pump -V50-, REMOVING AND INSTALLING, AUDI Q8, AUDI Q7 FROM PRODUCT IMPROVEMENT: Installing
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
- Used coolant cannot be used again.
-- Fill the coolant:
- Coolant Recirculation Pump -V50-. Refer to COOLANT, DRAINING AND FILLING, VEHICLE WITHOUT HIGH-VOLTAGE SYSTEM .
- Thermal Management Coolant Pump 2 -V618-. Refer to COOLANT, DRAINING AND FILLING, VEHICLE WITH HIGH-VOLTAGE SYSTEM, ENGINE COOLANT CIRCUIT .