Coolant Recirculation Pump -V50- REMOVING AND INSTALLING, AUDI Q7 THROUGH PRODUCT IMPROVEMENT: Removing
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Release and disconnect the connector -2-.
-- Release the catch in direction of -arrow- and remove the Coolant Recirculation Pump -V50-.
-- Clamp off the coolant hoses using the Hose Clamps - Up To 25mm: 3094 .
-- Loosen the hose clamps -1- and remove the coolant hoses.