Transmission Fluid Cooling Valve -N509-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
-- Release and disconnect the connector -2-.
-- Remove the bolts -arrows-.
-- Clamp off the coolant hoses using the Hose Clamps - Up To 25mm: 3094 .
-- Loosen the hose clamps -1- and remove the coolant hoses.