Transmission Fluid Cooling Pump -V478-, REMOVING AND INSTALLING, VEHICLES WITHOUT AUXILIARY RADIATOR FOR TRANSMISSION FLUID COOLER: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING .
-- Remove the bolts -2- and remove the heat shield -1-.
Fig 1: Component Location - Transmission Fluid Cooling Pump -V478-, Vehicles Without Auxiliary Radiator for Transmission Fluid Cooler
-- Disconnect the connector -7-.
-- Place a cloth underneath to catch any escaping coolant.
-- Loosen the hose clamps -6 and 8-, then clamp off the coolant hose -5 and 9- with the Hose Clamps - Up To 25mm: 3094 and then remove.
-- Remove the nuts -4- and remove the Transmission Fluid Cooling Pump -V478- -10- with the bracket -3-.
-- Remove the bolts -arrows- and disconnect the Transmission Fluid Cooling Pump -V478- -10- from the bracket -3-.