Transmission Fluid Cooling Pump -V478-, REMOVING AND INSTALLING, VEHICLES WITH AUXILIARY RADIATOR FOR TRANSMISSION FLUID COOLER: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the left front section of the wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Disconnect the connector -7-.

Fig 1: Transmission Fluid Cooling Valve -N509- Component Location

Courtesy of AUDI OF AMERICA, LLC

-- Place a cloth underneath to catch any escaping coolant.

-- Remove the coolant hoses -2 and 3- with the Hose Clamps - Up To 25 mm: 3094 and disconnect it from the Transmission Fluid Cooling Pump -V478- to do so loosen the hose clamps -4 and 5-.

-- Remove the bolts -9- and remove the Transmission Fluid Cooling Pump -V478- -6- with the bracket -8-.

-- Remove the bolts -arrows- and disconnect the Transmission Fluid Cooling Pump -V478- -6- from the bracket -8-.