Brake Booster Tester, Connecting

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the vacuum hose from the brake booster.

NOTE:

Pressing the brake pedal a few times beforehand makes it easier to remove the vacuum hose.

-- Connect the Brake Servo Tester: VAS6721 .

Fig 1: Connecting Brake Booster VAS6721

Courtesy of AUDI OF AMERICA, LLC

Item	Component	Explanation
A	Shut-off valve	In the direction toward the vacuum hose, the check valve and vacuum pump (if equipped)
B	Shut-off valve	Opening the Brake Servo Tester: VAS6721 makes it easier to remove Open to simulate a malfunction source Connect the Hand Vacuum Pump: VAS6213 .
C	Shut-off valve	In the direction toward the brake booster

-- Connect the Brake Servo Tester: VAS6721 hose -A- to the vacuum hose and push the adapter -C- into the brake booster.

Fig 2: Connect The - VAS 6721- Hose -A- Too The Vacuum Hose And Push The Adapter -C- Into The Brake Booster.

Courtesy of AUDI OF AMERICA, LLC