Overview - Vacuum Pump, 3.0L TDI Engine

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Vacuum Pump, TDI Engine

Courtesy of AUDI OF AMERICA, LLC

Vacuum Pump
- Integrated in the oil pump
- Removing and installing. Refer to OIL PAN/OIL PUMP .
Check Valve
- Cannot be replaced separately
- Refer to CHECK VALVE, CHECKING
Vacuum Hose
To the Solenoid Valve
Vacuum Line
- For vehicles without high-voltage system
Grommet
- For vehicles without high-voltage system
Vacuum Line
- For vehicles without high-voltage system
- With integrated check valve; cannot be replaced separately
- Refer to CHECK VALVE, CHECKING
- Refer to CHECK VALVE, REMOVING AND INSTALLING, WITH VACUUM LINE IN PLENUM CHAMBER
O-Ring
- For vehicles without high-voltage system
- Cannot be replaced separately
- If damaged, replace the Vacuum Sensor -G608-
Vacuum Sensor -G608-
- For vehicles without high-voltage system
- Refer to BRAKE BOOSTER PRESSURE SENSOR, REMOVING AND INSTALLING
To the Brake Booster
Bolt
- 9 Nm
Vacuum Hose
- Refer to CHECK VALVE WITH VACUUM HOSE IN ENGINE COMPARTMENT, REMOVING AND INSTALLING, 3.0L TDI ENGINE
Bolt
- 9 Nm
O-Ring
- Always replace after removing
Oil Pan Upper Section
O-Ring
- Always replace after removing