Overview - Vacuum Pump, 2.0L TFSI Engine
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
- Vacuum Pump
- Removing and Installing. Refer to VACUUM PUMP, REMOVING AND INSTALLING .
- Seal
- Always replace after removing.
- Vacuum Hose
- Bolt
- 8 Nm + 180°
- Always replace after removing.
- Vacuum Line
- From EVAP Canister Purge Regulator Valve 1 -N80- to EVAP canister
- Bolt
- 9 Nm
- Bolt
- 9 Nm
- Bolt
- Tightening specification. Refer to HIGH PRESSURE PUMP - 2.0L .
- High Pressure Pump
- Removing and Installing. Refer to HIGH PRESSURE PUMP - 2.0L .
- O-Ring
- Always replace after removing.