Check Valve, Removing And Installing, With Vacuum Line In Plenum Chamber: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the plenum chamber cover. Refer to BULKHEAD .
CAUTION:
Risk of damaging the vacuum hoses.
- Carefully remove the vacuum hoses. Replace the vacuum hose if damaged.
-- Disconnect the connector -2- for the Vacuum Sensor -G608-.
-- Carefully remove the vacuum line -3- from the plenum chamber bulkhead -4- and from the brake booster -1-.