Check Valve With Vacuum Hose In Engine Compartment, Removing And Installing, 3.0L TDI Engine: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing. Refer to AIR FILTER .
-- Remove the left engine cover. Refer to ENGINE COVER .
-- Remove the bracket for the A/C compressor. Refer to CYLINDER BLOCK, BELT PULLEY SIDE .
CAUTION:
Risk of damaging the vacuum hoses.
- Carefully remove the vacuum hoses. Replace the vacuum hose if damaged.
-- Remove the vacuum hose -2-.
-- Remove the bolt -1-.
-- If equipped, disconnect the vacuum hose -3- by pressing the release buttons on both sides.
-- Disconnect the vacuum hose -3- by pressing the release buttons on both sides.
-- Remove the bolt -2- and remove the vacuum hose -1- with the check valve.