LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> S7 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Hydraulic Components) >> 47 Hydraulic Components >> Vacuum System >> Check Valve, Removing And Installing >> Check Valve With Vacuum Hose In Engine Compartment, Removing And Installing, 3.0L TDI Engine >> Installing

Check Valve With Vacuum Hose In Engine Compartment, Removing And Installing, 3.0L TDI Engine: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

Replace the O-rings.

Coating the vacuum hose with water (not with oil) makes it easier to remove.

-- Install the bracket for the A/C compressor. Refer to CYLINDER BLOCK, BELT PULLEY SIDE .

-- Install the air filter housing. Refer to AIR FILTER .

scientia non olet · About LEMON Manuals