Brake Booster Pressure Sensor, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the plenum chamber cover. Refer to BULKHEAD .
-- Disconnect the connector -1- for the Vacuum Sensor -G608-.
-- Release the retainers in direction of -arrows- and carefully remove the Vacuum Sensor -G608- -2-.