Brake Caliper Piston, Removing And Installing: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Trim Removal Wedge: 3409
Assembly Tool: VAS40338

NOTE:

Carefully pry the protective cap -1- and the seal out of the brake caliper with the : VAS40338 -2- using gentle lever movements, and do not damage the groove for the protective cap in the brake caliper while doing so.

Fig 1: Prying The Protective Caps

Courtesy of AUDI OF AMERICA, LLC