Part II
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Support
- Turbocharger
- Removing and installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- O-Ring
- Not available separately; replace if leaking -item : Line or damaged
- Coat with engine oil
- Quantity: 2, depending on the version
- Line
- For the crankcase ventilation
- Bolt/Threaded Connection
- 9 Nm
- Depending on the version a bolt or a threaded connection with a connected hose is installed.
- Oxygen Sensor 1 Before Catalytic Converter -GX10-
- Removing and Installing. Refer to HEATED OXYGEN SENSOR, REMOVING AND INSTALLING .
- O-Ring
- Always replace after removing.
- Coat with engine oil
- Oil Supply Line
- Bolt
- 9 Nm
- O-Ring
- Always replace after removing.
- Coat with engine oil
- Bolt
- 9 Nm
- Bolt
- 30 Nm
- Coat the with hot bolt paste. Refer to the Parts Information.
- Heat Shield
- Bolt
- 9 Nm
- Coolant Supply Line
- O-Ring
- Always replace after removing.
- Coat with engine oil
- Bolt
- 9 Nm
- O-Ring
- Always replace after removing.
- Coat with coolant
- Bolt
- 20 Nm + 90°
- Always replace after removing.