Rear Seat Backrest Locking Mechanism, Removing And Installing, Center Second Row Seat: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Seat High: fold the outer seats forward.
-- Seat Low: remove the seat. Refer to SEAT LOW, REMOVING AND INSTALLING, CENTER SECOND ROW .
-- Remove the seat side trim. Refer to SEAT SIDE TRIM, REMOVING AND INSTALLING, CENTER SECOND ROW SEAT .
-- Destroy the lock washer -6- and remove it.
-- Label the installation position of the spiral spring -2-.
-- Disengage the pull loops -3 and 5-.
-- If necessary, deburr the backrest release shaft near the lock washer.
-- Slide the backrest release shaft -4- with the release lever -1- through to the opposite side -arrow-.