Release the Upper Catches:
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the Wedge 02 from the :VAS895 015 between the cushion and the cover.
TIP:
Insert the outer edge of the wedge from the inside of the seat along the seat seam. Insert the wedge is slightly to the start of the steps.
-- Push the cushion to the side and release the hook -arrow A- and in the catch -arrow B- using the Wedge 03 and at the same time pull the backrest cover downward out of the catch.
-- Repeat the procedure for the hook on the opposite side.
Installing
Install in reverse order of removal and note the following:
-- Check if the backrest cover is correctly latched.