Seat Bolster Inflation Adjuster Air Cushion, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Remove the seat cushion with cover. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, SEAT WITH SEAT DEPTH ADJUSTER .
-- Disconnect the pneumatic lines -1- to the seat bolster inflation adjuster on the left and right side of the seat by carefully lifting the safety catch slightly using a small screwdriver -arrow-
-- Remove the bolts -3-.
-- Remove the expanding clip -2-.
-- Disengage the upholstery wire -1- in the direction of -arrow A- and direction of -arrow B- from the seat bolster inflation adjuster bracket -2-.
-- Remove the seat bolster inflation adjuster bracket -2-.