Seat Bolster Cushion On Seat Pan, Removing And Installing, Seat With Seat Depth Adjuster: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Secure the front seat to the : VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Remove the front seat trim. Refer to FRONT SEAT TRIM, REMOVING AND INSTALLING .

-- Remove the tunnel-side seat side trim. Refer to SEAT SIDE TRIM ON TUNNEL SIDE, REMOVING AND INSTALLING .

-- Remove the seat side trim on the side sill side. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING .

-- Remove the backrest. Refer to FRONT BACKREST, REMOVING AND INSTALLING .

-- Equipped on some models: remove the child seat anchor. Refer to FRONT CHILD SEAT ANCHOR, REMOVING AND INSTALLING .

-- Disengage the cover molding at the rear of the seat pan -arrow- using the : 3370 .

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the molding on the tunnel side -2- using the : 3370 .

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the tab -1-.

-- Disengage the tabs on the tunnel-side -arrows- and pound the cover upward over the seat bolster cushion.

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the tabs on the side sill side -arrows- and pound the cover upward over the seat bolster cushion.

Courtesy of AUDI OF AMERICA, LLC

-- Equipped on some models: release and disconnect the connector and free up the wire for the heating element.

-- Remove the seat bolster cushion.