Overview - Front Thorax Airbag

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Front Thorax Airbag

Courtesy of AUDI OF AMERICA, LLC

Front Thorax Airbag
- Driver side: with Driver Thorax Airbag Igniter -N199-
- Front passenger side: with Front Passenger Thorax Airbag Igniter -N200-
- Removing and Installing. Refer to FRONT THORAX AIRBAG WITH IGNITER, REMOVING AND INSTALLING .
Bolt
- Replace after removing.
- Clean the threaded hole for the bolt with a thread tap, for example
- Install with locking compound. Refer to the Parts Information for the locking compound.
- 10 Nm
Wire
- From Driver Thorax Airbag Igniter -N199- /Front Passenger Thorax Airbag Igniter -N200- directly to the connector station
- Removing and Installing. Refer to THORAX AIRBAG WIRE, REMOVING AND INSTALLING .
Backrest Frame