Front Seat Belt Latch, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

If parts of the seat belt system are removed due to an accident, replace the belt system bolts.

-- Position the seat belt latch so that the anti-twist mechanism engages in the cut-out on the seat frame.

-- Check and erase the airbag control module DTC memory because faults can be stored from when the connectors are disconnected. Use the Vehicle Diagnostic Tester.