Overview - Driver Side Airbag
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Wiring Harness
- For the Driver Airbag Igniter -N95- and Driver Airbag Release Valve Igniter -N490-
- Removing and Installing. Refer to CONNECTOR ON AIRBAG, REMOVING AND INSTALLING .
- Steering Column Electronics Control Module -J527-
- With Airbag Spiral Spring/Return Spring with Slip Ring -F138-
- Overview. Refer to OVERVIEW - STEERING COLUMN SWITCH MODULE .
- Steering Wheel
- Overview. Refer to OVERVIEW - STEERING WHEEL .
- Bolt
- Tightening specification. Refer to OVERVIEW - STEERING WHEEL .
- Driver Side Airbag
- With the Driver Airbag Igniter -N95- and Driver Airbag Release Valve Igniter -N490-
- Removing and Installing. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .