Audi A7 (4K) from MY 2018
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, 2021 Audi RS 7 Sportback, and 2021 Audi A7 e Quattro. However, it is still accessible from the selected car via links, so may be relevant.
| Vehicle | Adapters Necessary for the Connections to the Reservoir or Receiver/Dryer | Required Adapters for the Connections to Receiver/Dryer | Miscellaneous |
|---|---|---|---|
| Audi A6 (4A) from MY 2019 Audi A7 (4K) from MY 2018 | -- Compressor manufacturer "Denso"
|
-- No adapter required, dryer is removed from receiver/dryer on condenser and the opening is sealed. | The expansion valve is removed and Refrigerant Circuits Adapter Set 1 - Adapter 44 :VAS6338/44 is installed (or an old expansion valve is drilled on and installed as an adapter). Refer to CLEANING THE REFRIGERANT CIRCUIT, PRELIMINARY WORK (FLUSHING WITH REFRIGERANT R1234YF) and the Parts Information. |
NOTE:
Condensers with an integrated receiver/dryer or dryer cartridge that cannot be replaced separately or is not available as a replacement part, the condenser must be replaced after flushing (with the dryer cartridge installed). Refer to Refrigerant Circuit (vehicle-specific Service Information) and the Parts Information.