Striker, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the lock carrier trim panel. Refer to LOCK CARRIER TRIM PANEL, REMOVING AND INSTALLING .

-- Mark the installation position for reinstallation.

-- Remove the nuts -1 and 3- and remove the catch -2-.

Fig 1: Identifying Combination Nuts -1- And -3-, Striker Pin -2-

Courtesy of AUDI OF AMERICA, LLC