LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> S7 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Rear Lid, Adjusting >> Adjustment Dimensions

Adjustment Dimensions

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
GWWA55-11126Courtesy of AUDI OF AMERICA, LLC
  1. Rear Lid to Side Panel Bottom
    • Gap dimension = 4.0 mm
  2. Rear Lid to Top of Side Panel
    • Gap dimension = 4.0 mm
  3. Rear Lid to Roof
    • Gap dimension = 4.5 mm
  4. Rear Lid to Rear Lid End
    • Gap dimension = 4.0 mm
scientia non olet · About LEMON Manuals