Rear Lid Motor 1 -V444- AND Rear Lid Motor 2 -V445-
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Connect the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Select and start the Diagnostic operating mode.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Body
- Body Assembly
- 01 - OBD-capable systems
- 6D - Rear Lid Electronics, J605
- 6D - Rear Lid Control Module, Functions
- 6D - Basic Setting, Rear Lid Control Module
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.