Rear Lid Control Module -J605-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the roof end strip. Refer to ROOF END STRIP, REMOVING AND INSTALLING .
-- Disconnect the connectors -3 and 5-.
-- Release the catches -1 and 2- and at the same time push the control module -4- to the left side -arrow-. Doing so disengages the brackets from the guides.
-- Remove the Rear Lid Control Module -J605-.