Power Rear Lid Opening Control Module -J938-, REMOVING AND INSTALLING, FROM PRODUCT IMPROVEMENT: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bolts -arrows- on the spoiler of the bumper cover.
TIP:
The quantity of bolts -arrows- varies depending on the model.
-- Release and disconnect the connectors -2 and 3-.
-- Release the retainers -arrows-.
-- Remove the Power Rear Lid Opening Control Module -J938- -item 1- from the mount.