Power Rear Lid Opening Control Module -J938-, REMOVING AND INSTALLING, BEFORE PRODUCT IMPROVEMENT: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bolts -arrows- on the lower section of the bumper cover.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connectors -3 and 4-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the catches -1 and 5-.

-- Remove the control module -2- from the mount.