Coupling With Latch Release Cables, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing. Refer to the appropriate Service Information .
-- Remove the latch and disengage the release cable for the latch release lever. Refer to LATCH, REMOVING AND INSTALLING .
-- Release the retainers -arrows- and remove the housing cover -1-.
-- Loosen the release cable -4- from the support bracket -3- and disengage the release cable nipple -2-.
-- Release the catches and remove the coupling from the lock carrier.
-- Free up the release cables and guide them out of the lock carrier.