Mounting Bracket With Hook Operating Lever Release Cable, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the hook release lever. Refer to HOOK RELEASE LEVER, REMOVING AND INSTALLING .
-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
-- Remove the latch and disengage the mounting bracket release cable. Refer to LATCH, REMOVING AND INSTALLING .
-- Free up the wiring harness -8-.
-- Pry out the clips -4 and 7-.
-- Remove the bolts -5 and 9-.
-- Versions with radiator shutter: remove the bolt -2-.
-- Remove the mounting bracket -1- and free up the release cables -3 and 6-.